Back to all articlesCampaign briefs

Decide which campaign changes require fresh approval

Alactic Editorial10 min read

Prepared with AI assistance by Alactic Editorial. Examples identified as hypothetical are illustrative, not customer results.

A campaign approved on Monday can become a different proposition by Thursday. A shorter headline may preserve the original decision. A smaller discount allowance, a new conversion goal, or a promise that depends on another team may not. Sending every edit back to the full approval group wastes attention; treating every edit as covered by the original approval leaves important decisions unowned.

Require fresh approval when a change alters the decision someone previously authorised. Assess its effect on the objective, offer, customer-facing promises, dependencies and risk—not how many words changed. Log meaning-preserving edits, seek targeted approval for bounded material changes, and reopen the brief when the campaign's purpose or underlying assumptions change.

The practical task is to define what the original approval covers, then compare each proposed change against that boundary. The fictional change-control table below shows how to do that without restarting the entire process for every correction.

1. Make the original approval specific enough to test

An approval that says only “campaign approved” gives the next editor little guidance. It does not show whether the reviewer accepted the commercial terms, the audience, the objective, the operational workload, or merely the wording.

Before applying campaign change approval rules, record a compact approval baseline:

  • Objective and success measure: the action the campaign should produce and how the team will judge it.
  • Audience and exclusions: who is included, who is excluded, and the assumptions behind that selection.
  • Offer and limits: price or benefit, qualifying conditions, availability, expiry and redemption restrictions.
  • Promises: what recipients are told they will receive, including timing and service commitments.
  • Dependencies: the stock, staffing, information or partner action needed to fulfil the campaign.
  • Risk boundaries: the approved exposure, such as spend, service demand or uncertainty in a claim.
  • Decision owners: who accepted each material element and any conditions they attached.

This need not become a second brief. A short decision summary attached to the brief is enough if reviewers can identify what they accepted. Record conditional approval explicitly: “Proceed only after stock confirmation” is not equivalent to unrestricted approval.

If the baseline is missing, do not guess at its boundaries. Ask the accountable campaign owner to confirm them before classifying disputed changes.

2. Test the effect of the change, not its apparent size

Use the same questions for every proposed edit. A single changed word can create a new promise, while a rewritten paragraph may preserve the original meaning.

  1. Objective: Does this change the action requested, the primary outcome or the success measure?
  2. Offer: Does it change eligibility, value, availability, expiry or redemption conditions?
  3. Promises: Would a reasonable recipient now expect something different?
  4. Dependencies: Does success now rely on a new team, supplier, data input or fulfilment step—or on greater capacity from an existing one?
  5. Risk: Does it expand exposure, affect different recipients, introduce uncertainty or remove an agreed safeguard?

Also check timing and audience through these questions. Moving a send date can invalidate stock confirmation or staffing assumptions. Broadening an audience can change eligibility and expected demand even when the message stays identical.

For each dimension, record “unchanged,” “changed” or “unknown,” with a short reason. Unknown is a reason to investigate, not permission to proceed. The investigation can be narrow: ask the fulfilment owner whether the revised timing remains supportable rather than convening every reviewer.

3. Use a filled change-control table

Fictional worked example: Every campaign detail and number in this example is hypothetical. A retailer has approved a campaign inviting eligible existing customers to book a showroom consultation. The offer is a 15% accessory discount after attending, limited to one redemption per customer and the first 100 eligible redemptions. The campaign promises a booking confirmation within two business days. Existing staff and stock support the plan.

The following filled table is a decision record, not a product feature. The rows show separate proposed changes against that same approved baseline.

Change-control table — hypothetical campaign

ID | Proposed change                  | Classification | Route
A  | Correct headline punctuation     | Cosmetic       | Log + check
B  | Reduce redemption cap: 100 to 50  | Offer change   | Targeted approval
C  | Replace bookings with purchases  | Objective      | Reopen brief
D  | Add partner-provided gift        | New dependency | Targeted + condition
E  | Promise same-day confirmation    | Promise/risk   | Targeted approval
F  | Combine B, D and E               | Compound       | Reassess whole plan

A: Correct headline punctuation

Impact: Objective, offer, promises, dependencies and risk remain unchanged. The editor checks that punctuation does not alter meaning, eligibility or emphasis. Required action: log the correction and have the designated checker compare it with the approved meaning. Existing business approval remains valid; no new commercial decision is needed.

B: Reduce the redemption cap from 100 to 50

Impact: Offer availability changes. Lower exposure does not make the edit cosmetic: fewer recipients can obtain the benefit. Required action: obtain fresh approval from the commercial offer owner and confirmation from the fulfilment owner. Check that the revised limit is clear wherever the offer is described. Unaffected approvals can stand if their assumptions still hold.

C: Replace consultation bookings with immediate purchases

Impact: The objective, requested action and success measure change. Audience suitability and the role of the discount may also change. Required action: reopen the brief. The campaign owner must restate the purpose and route the resulting decisions to the relevant owners. The old booking approval does not authorise a purchase campaign.

D: Add a gift supplied by a delivery partner

Impact: The offer gains a benefit and now depends on partner stock and fulfilment. Required action: obtain approval from the offer owner and the person accountable for the partner arrangement. Make approval conditional on documented availability, a fulfilment commitment and a decision about what happens if the gift becomes unavailable. Without those confirmations, exclude the gift or hold the affected campaign.

E: Promise same-day booking confirmation

Impact: The customer-facing promise changes and may require more staff coverage. Required action: ask the service owner to accept the commitment and the campaign owner to approve the revised promise. If capacity cannot be confirmed, retain the previously approved timing rather than publishing the faster promise and hoping to meet it.

F: Combine the smaller cap, partner gift and faster confirmation

Impact: Several bounded edits interact. The gift may increase demand while faster confirmation increases workload. Required action: reassess the combined plan against the baseline. Reopen the brief if the owners cannot evaluate the combined effect within the original assumptions. Separate approvals for isolated changes are not sufficient evidence that the combination works.

4. Match the approval route to the decision

A workable policy has a small number of routes with clear entry criteria.

  • Log and check: use when meaning and all approved assumptions remain intact. A named checker confirms equivalence; the change record explains why no fresh business approval was needed.
  • Targeted reapproval: use when a material change is bounded and its effects are understood. The owner of the changed decision approves it, and affected dependency owners confirm feasibility.
  • Reopen the brief: use when the objective changes, several assumptions move together, or the impact cannot be isolated confidently. Reassess the plan, while retaining clearly unaffected work where appropriate.
  • Hold pending evidence: use when a necessary fact or decision is missing. Identify the missing evidence and its owner instead of circulating an ambiguous approval request.

Targeted approval reduces unnecessary review, but only if someone checks for secondary effects. A commercial owner may accept a larger benefit without knowing that fulfilment cannot support it. Give the campaign owner responsibility for identifying affected reviewers; do not expect each specialist to discover every dependency.

A reopened brief also need not mean discarding all previous approvals. Ask which decisions remain valid and record that explicitly. This preserves useful work without pretending the entire campaign is unchanged.

5. Request approval for the difference, with enough context

A reviewer should not have to reconstruct the change from a long conversation. Send a compact change request that contains:

  • The approved baseline being changed.
  • The before-and-after position and the reason for the change.
  • The affected dimensions and any secondary effects.
  • The recommended route and named decision owners.
  • The evidence available, unresolved conditions and required decision.
  • The fallback if the change is declined or cannot be confirmed.

For hypothetical change D, the request could read: “Add a partner-provided gift to the approved consultation offer. Booking objective and discount remain unchanged. Partner availability and fulfilment responsibility are not yet confirmed. Request conditional approval from the offer and partner owners. If confirmation is unavailable at the campaign decision point, proceed only with the original offer.”

Record the response as approved, approved with conditions, declined or awaiting information. Silence should not count as fresh approval. A deadline can trigger escalation or use of an already approved fallback; it should not turn an unanswered request into consent.

Close each condition with evidence and a named checker. “Partner confirmed” is less useful than a record of what availability and fulfilment commitment were confirmed, and who accepted that evidence.

6. Keep business approval separate from channel requirements

Business approval answers whether the organisation accepts the campaign decision. It does not establish that every channel requirement is satisfied or that delivery will occur.

For WhatsApp campaigns, recipient permission matters and opt-outs must be honoured. Approved templates are used to initiate Platform conversations and outside the 24-hour customer-service window, which opens or resets with a user message. Template approval does not guarantee delivery. Check the current WhatsApp Business Messaging Policy for precise requirements.

Keep campaign preparation, template review and actual delivery as separate states. A material offer change may need fresh business approval regardless of channel review status. Conversely, channel review does not repair a missing commercial decision. This article addresses the validity of campaign approval, not template version management or technical deployment procedures.

7. Recover when a material change slips through

If a team discovers that a changed campaign relied on stale approval, first establish what happened. Was the change only proposed, prepared for use, or already communicated? Do not assume all three states require the same response.

  1. Hold further affected activity where possible. Identify the changed element and the campaign owner responsible for the decision.
  2. Compare against the last valid baseline. State which objective, term, promise, dependency or risk moved without approval.
  3. Assess existing commitments. If recipients have already seen the changed offer, account for their expectations. Reverting future copy alone does not resolve an earlier promise.
  4. Choose a recovery route. Seek explicit approval to retain the change, return to the valid baseline where appropriate, or develop a corrective communication with the relevant owners.
  5. Repair the rule that failed. Clarify the missing trigger, owner or evidence requirement rather than automatically adding full review to every edit.

Common failure patterns are observable. Repeated disputes about “minor” edits suggest the baseline is vague. Frequent late dependency discoveries suggest requests omit feasibility checks. Approval queues full of punctuation corrections suggest the cosmetic route is not trusted or clearly delegated.

8. Test the rules on the next campaign

Before the next campaign review, write its approval baseline and name the owners for the five change dimensions. Then classify a small set of recent edits using the filled table's format. Resolve disagreements before the next urgent change arrives.

For a hypothetical pilot, review the next ten change requests. Track how many use each route, how many are returned for missing information, how long decisions wait, and whether any material changes are discovered after use. These measures diagnose the process; they are not performance benchmarks.

If cosmetic edits repeatedly need clarification, tighten the equivalence rule. If targeted approvals miss downstream effects, improve the dependency check. If every change reopens the brief, narrow the routes rather than simply asking reviewers to work faster.

The next action: take one active campaign and record its approved objective, offer, promises, dependencies and risk boundaries. For its next proposed change, capture the before-and-after position, selected route, decision owner and evidence needed. That creates a testable approval decision instead of another ambiguous “looks good.”

Campaign briefsApproval workflowsChange controlMarketing operations

Put the next conversation to work.

Explore Alactic Communications for WhatsApp conversations, campaigns and AI-assisted workflows. Choose the product and plan that fit your team.

Explore Communications